186 CB
FEATURES
Cable Tracer
- Trace wires or cables.
- Volume control.
- Tip & Ring identification.
- 2 bi-colored LEDs ( Line 1 & Line 2).
- Tone speed selection : Fast & Slow.
- A phone jack is designed for headset or handset.
(Amplifier probe)
Digital Multimeter
- 4000 counts.
- ACV, DCV.
- Ohm, Diode, & Continuity testing.
- Auto-range.
- Data hold.
- Low battery indication.
- Select function.
- Auto-off.
SPECIFICATIONS
AC Voltage
| Range | Resolution | Accuracy |
|---|---|---|
| 400mV | 0.1mV | ±(1.0%rdg+5dgt) |
| 4V | 1mV | |
| 40V | 10mV | |
| 400V | 100mV | |
| 750V | 1V |
DC Voltage
| Range | Resolution | Accuracy |
|---|---|---|
| 400mV | 0.1mV | ±(0.5%rdg+3dgt) |
| 4V | 1mV | |
| 40V | 10mV | |
| 400V | 100mV | |
| 1000V | 1V |
Resistance
| Range | Resolution | Accuracy |
|---|---|---|
| 400Ω | 0.1Ω | ±(1.2%rdg+3dgt) |
| 4kΩ | 1Ω | |
| 40kΩ | 10Ω | |
| 400kΩ | 100Ω | |
| 4MΩ | 1kΩ | |
| 40MΩ | 10kΩ | ±(2.0%rdg+4dgt) |
Continuity Test
| Range | Audible threshold |
|---|---|
| 400Ω | Less than 25Ω |
SPECIFICATIONS
| Frequency detection | Amplifier Probe: 1Hz~12kHz Tone Generator: 1kHz ±15% |
|---|---|
| Over protection | Tone Generator: 80V DC |
| Alternating tone | Fast and Slow |
| Connection | Tone Generator : RJ11 connector alligator clip x 2 |
| Sensitivity control | |
| Receiver distance | <50cm |
| Operating temperature & humidity | 0°C ~ 40°C, 80% Max. |
| Temperature & humidity | Operating: 0°C~40°C ≤80% R.H. Storage: -10°C~50°C ≤80% R.H. |
| Dimensions | Amplifier Probe: 230(L) x 56(W) x 27(D)mm Tone Generator/DMM: 183(L) x 82 (W) x 44(D)mm |
| Weight (battery included) |
Amplifier Probe: 125g Tone Generator/DMM: 305g |
| Power source | Amplifier Probe: 9V(6F22) × 1 Tone Generator: 9V(6F22) × 1 DMM: 1.5V(AAA) x 2 |
| Safety standard | EN 61010-1 CAT Ⅲ 600V EN 61326-1 EN 55011 EN 61000-4-2 EN 61000-4-3 |
Feedback list