183 CB
FEATURES
Cable Tracer
- Trace wires or cables.
- Volume control.
- Tip & Ring identification.
- 2 bi-colored LEDs ( Line 1 & Line 2).
- Tone speed selection : Fast & Slow.
- A phone jack is designed for headset or handset. (Amplifier probe)
Phone Tester
- Continuity and resistance testing for voltage-free objects.
- Check direct and alternating voltages.
- Testing capacitors.
- Testing diodes.
- Power ON/OFF switch.
- The indication of the LED lamp and the sound of the buzzer can occur at the same time.
- The LED indication for Power ON status.
SPECIFICATIONS
Amplifier Probe
| Frequency | 1Hz~12kHz |
|---|---|
| Receiver distance | < 50cm |
| Sensitivity control | |
| Probe tip | Fixed |
| Power source | 9V(6F22) × 1 |
| Dimensions | 230(L) × 56(W) × 27(D)mm |
| Weight | Approx. 125g (battery included) |
Tone Generator
| Wave form | Square Wave |
|---|---|
| Frequency | 1kHz±15% |
| Over voltage protection | 80V DC |
| Single tone | ─ |
| Alternating tone | Fast and Slow |
| Connection | RJ11 connector, alligator clip x 2 |
| Power source | 1.5V (AA) × 6 |
| Dimensions | 143(L) × 74.5(W) × 33.6(D)mm |
| Weight (battery included) |
Approx. 318g |
Phone Tester
| Loud speaker | |
|---|---|
| Continuity testing | |
| Checking resistance | |
| ACV/DCV checking | |
| Checking capacitors | |
| Checking diodes |
General
| Operating temp & humidity | 0˚~40˚C, 80% Max. |
|---|---|
| Storage temp & humidity | -10˚~50˚C, 80% Max. |
| Safety standard | EN 61326-1 EN 55011 EN 6100-4-2 EN 6100-4-3 |
Feedback list