162 CB
FEATURES
Filter Probe
- Works with any Tone Generator to identify wires.
- Volume control for increasing sensitivity and adjustable to suit work environment.
- 2 operation modes: Filter on / Filter off.
- The auto-off function (5 minutes) prevents battery consumption.
- Power supply is available in any 9V battery with a life of approximately 50 hours.
- A phone jack is designed for headset or handset.
- Flashlight function.
Tone Generator
- Tone Generator is a great tool for locating and identifying cable pairs or individual conductors.
- 162 CB-G doesn't only provide the function of a tone generator, but also serves as a continuity and polarity tester.
- A tone selector switch located inside the unit for selection of the fast tone or the slow tone.
- Two bi-colored LEDs for Line1 and Line 2 indication of the polarities of the telephone lines.
- The unit has alligator type terminals, a modular cable of 4 conductors with a strong connector.
- The tone and continuity functions are only applied to Line1. (Modular connector)
SPECIFICATIONS
Filter Probe
| Operation mode | Filter on (avoid the interference of 50Hz/60Hz) |
|---|---|
| Filter off | |
| Receiver distance | < 50cm |
| Sensitivity control | |
| Probe tip | Fixed |
| Power source | 9V battery × 1 |
| Dimensions | 250(L) × 39(W) × 38(D)mm |
| Weight (battery included) |
Approx. 180g |
Tone Generator
| Wave form | Square Wave |
|---|---|
| Frequency | 1kHz±15% |
| Over voltage protection | 80V DC |
| Alternating tone | Fast and Slow |
| Connection | RJ11 connector, alligator clip x 2, RJ45 connector (optional) |
| Power source | 9V battery × 1 |
| Dimensions | 86(L)×63(W)×26(D)mm |
| Weight (battery included) |
Approx. 130g |
General
| Operating temp & humidity | 0˚~40˚C, 80% Max. |
|---|---|
| Storage temp & humidity | -10˚~50˚C, 80% Max. |
| Safety standard | EN 61326-1 EN 61000-4-2 EN 61000-4-3 |
Feedback list