ST-3201
FEATURES
- Display : 3½ digit liquid crystal display (LCD) with max. reading of 1999.
- Polarity : Automatic, (-) negative polarity indication.
- Zero Adjustment : Automatic.
- Over Range Indication : Highest digit of (1) or (-1) is displayed.
- Low Battery Indication : The (BAT) is displayed when the battery voltage drops below the operating voltage.
- Measurement Rate : 3 measurements per second, nominal.
- Operating Temperature : 0ºC ~ 50ºC, 70% R. H.
- Storage Temperature : -20ºC ~ 60ºC, 80% R. H.
- Accuracy : Accuracy specifications at 23 ± 5ºC, less than 75% R. H.
- Power : Single, 006P 9 volt battery
- Dimensions : 128(L) × 72(W) × 33(D) mm.
- Weight : Approx. 183g
SPECIFICATIONS
DC Voltage
Input impedance : 10MΩ
| Ranges | Resolution | Accuracy | Over voltage Protection |
|---|---|---|---|
| 200mV | 100μA | ±(0.5%rdg+1dgt) | DC 500V AC 350V |
| 2V | 1mV | ||
| 20V | 10mV | DC 1200V AC 800V |
|
| 200V | 100mV | ||
| 1000V | 1V |
AC Voltage
| Ranges | Resolution | Accuracy | Over voltage Protection |
|---|---|---|---|
| 200V | 100mV | ±(1.0%rdg+4dgt) | DC 1200V AC 800V |
| 750V | 1V | ±(1.5%rdg+4dgt) |
DC Current
Overload Protection0.8A(250V) fast blow fuse
| Ranges | Resolution | Accuracy | Over voltage Protection |
|---|---|---|---|
| 200μA | 10nA | ±(1.0%rdg+1dgt) | 325mV max |
| 2mA | 1μA | ||
| 20mA | 10μA | ||
| 200mA | 100μA | ||
| 10A | 10mA | ±(2.0%rdg+3dgt) | 700mV max |
Resistance
| Ranges | Resolution | Accuracy | Max test current | Max open circuit voltage |
|---|---|---|---|---|
| 200Ω | 0.1Ω | ±(1.0%rdg+3dgt) | 3mA | 3.2V |
| 2kΩ | 1Ω | ±(0.8%rdg+1dgt) | 250μA 50μA 5μA 500nA |
0.3V |
| 20kΩ | 10Ω | |||
| 200kΩ | 100Ω | |||
| 2MΩ | 1kΩ | |||
| 20MΩ | 10kΩ | ±(3.0%rdg+1dgt) | 50nA |
Frequency
| HFE test | |
|---|---|
| Base DC current | 10uA |
| Vce | 2.8 ± 0.4V |
| HFE | 0 to 1000 |
| Diode | |
| Test current | 1.0 ± 0.6mA |
| Test voltage | 3.2V max. |
| BATT voltage | |
| Range | Load |
| 1.5V | 10Ω |
| 9V | 900Ω |
| 1.5V | 4kΩ |
Feedback list