FEATURES
- Full Autoranging for V, A and Ω functions.
- Data Hold function freezes reading in dimly lit or hard to reach places.
- Low battery indication.
- Built-in buzzer for continuity test.
- Auto-zero / REL function.
- Non-contact voltage detection.
- Auto power off.
SPECIFICATIONS
ACV
*Overload protection: 600V AC RMS
*Frequency Response:
- 0~400mV at 40Hz~100Hz
- 4V~600V at 40Hz~500Hz
| Range |
Resolution |
Accuracy (at 40~500Hz) |
| 400mV |
0.1mV |
± (2.0% rdg+3dgt) |
| 4V |
1mV |
± (1.5% rdg+3dgt) |
| 40V |
10mV |
± (1.5% rdg+3dgt) |
| 400V |
100mV |
± (1.5% rdg+3dgt) |
| 600V |
1V |
± (1.5% rdg+3dgt) |
ACA
*Frequency Response 40Hz~500Hz
| Range |
Resolution |
Accuracy |
| 400A |
0.1A |
± (1.5% rdg+4dgt) |
| 1200A |
1A |
± (2.5% rdg+4dgt) |
DCV
*Overload protection : 600V DC
| Range |
Resolution |
Accuracy |
| 400mV |
0.1mV |
± (1.0% rdg+3dgt) |
| 4V |
1mV |
± (1.0% rdg+3dgt) |
| 40V |
10mV |
± (1.0% rdg+3dgt) |
| 400V |
100mV |
± (1.0% rdg+3dgt) |
| 600V |
1V |
± (1.0% rdg+3dgt) |
DCA
| Range |
Resolution |
Accuracy |
| 400A |
0.1A |
± (1.5% rdg+4dgt) |
| 1200A |
1A |
± (2.5% rdg+4dgt) |
Resistance
*Overload protection : 500V AC RMS or 500V
| Range |
Resolution |
Accuracy |
| 400Ω |
0.1Ω |
± (1.5% rdg+3dgt) |
| 4KΩ |
1Ω |
± (1.5% rdg+3dgt) |
| 40KΩ |
10Ω |
± (1.5% rdg+3dgt) |
| 400KΩ |
100Ω |
± (1.5% rdg+3dgt) |
| 4MΩ |
1KΩ |
± (1.5% rdg+3dgt) |
| 40MΩ |
10KΩ |
± (2.0% rdg+4dgt) |
Continutity Test
| Range |
Audible threshold |
| 400Ω |
Less than 35Ω |
Diode Test
| Range |
Resolution |
Accuracy |
| 2V |
1mV |
± (1.5% rdg+3dgt) |
NCV Test
| Range |
Frequency |
| 50V~1000V AC |
50Hz~500Hz |
| Audible indication |
LED indication |
| V |
V |
- Measurement category: CAT III 600V
- Indication: LED and Tone
- Temperature: 0~40°C
- Operating conditions:
Humidity less than 80% R.H. For indoor use only
- Buzzer: < 35Ω
- Conductor size: 40mm max.
- Low battery indication:
- Dimmensions: 255(L) x 80(W) x 35(D) mm
- Weight: Approx. 420g (battery included)
- Power Source: 9V (6F22) × 1
- Safety standard:
- EN 61010-1 CAT III 600V
- EN 61010-2-32
- EN 61010-2-33
- EN 61326-1
- Accessories:
- Instruction manual
- Test leads
- Soft pouch
- Battery
Feedback list