1825 LP
FEATURES
- Microprocessor-controlled.
- Measures the voltage drop as if 16A was flowing between Line and Neutral.
- Displays voltage without current (V at 0A).
- Display voltage as if 16A flowing between Line and Neutral (V at 16A).
- Loop test for L-E
- PSC between L-N.
- Single one smart push button operation; ON, Scroll through results and menus.
- Checks wiring integrity (LEDs).
- Auto off/auto ranging (software range).
- Combined prospective short circuit current, loop and load tester.
- Display can be customized for large orders.
SPECIFICATIONS
| Loop impedance range L-E | 0.03-2000Ω (software ctrl) |
|---|---|
| Test currents in each loop | 11.76A at 230V / 50Hz |
| Voltage measurement L-N | 50 to 280V AC (Sine) |
| Load current for volt drop (L-N) | 16A (Calculation) |
| Neutral wire resistance | (Not available, see 1826 NA) |
| Line wire resistance & transformer windings | (Not available, see 1826 NA) |
| PSC current (L-N) max | 6kA at 230Vac supply |
| PSC current (L-E) max | (Not available, see 1826 NA) |
| Operating voltage | 230V±20V at 50Hz Sine |
| Typical Accuracy | |
| Loop impedance | ±5%rdg ± 2dgt |
| PSC current | ±12%rdg ± 5dgt |
| Voltage | ±3%rdg ±1dgt |
| Operating - temperature Operating - humidity |
-10°C to +40°C 80% Max. relative humidity |
| Dimensions | 170(L) x 165(W) x 92(D)mm |
| Weight (battery included) |
Approx. 970g |
| Power source | 1.5V (AA) x 8 |
| Safety standard | EN 61010-1 CAT III 300V EN 61326-1 |
Feedback list