FEATURES

• The AC Hotstick consists of a high sensitivity AC amplifier for the frequency range 50/60Hz.
• For detecting if there is voltage presence in firefighting field.
• AC voltage detection: 100Vac~50kVac. 
• The warning signals (beeps and LED flashes) will increase as the signal amplitude increases. This makes it possible to locate the source of the signal quickly.
• The AC Hotstick has 3 sensitivity settings:
  1. High sensitivity setting
  2. Low sensitivity setting
  3. Front focused setting
• The HIGH SENSITIVITY SETTING allows the detection of AC from the greatest distance.
• In the LOW SENSITIVITY SETTING, the overall sensitivity is reduced. This aids in detecting the source of the signal.
• The FRONT FOCUSED MODE allows pinpointing a source. In this mode a small sensor in the front is shielded from signals coming from the sides. This makes the unit directional and the influence of e.g. high voltage wires overhead is greatly reduced.
• Non-contact detection by proximity
• Comply with EN61326-1
• Operating temperature: 0ºC~40ºC
• Storage temperature: -10ºC~50ºC
• Case height: 542mm 
• Case width: 53mm
• Weight: 480g
• Power source: 1.5V(AA)Alkaline battery × 4