181 CB
FEATURES
Amplifier Probe
- The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.
- Works with any Tone Generator to identify wires.
- Volume control for increased sensitivity and adjustable to suit work environment.
- Recessed ON/OFF button prevents battery drain.
- A phone jack is designed for headset or handset.
Tone Generator
- Tone Generator is a great tool for locating and identifying cable pairs or individual conductors.
- 181 CB-G does not only serve as a tone generator, but also serves as a continuity and polarity tester.
- A tone selector switch located inside the unit for selection of the fast tone or the slow tone.
- The continuity function is only applied to Line 1.
- Two bi-colored LEDs for Line1 and Line2 indication of the polarities of the telephone lines.
- The unit has alligator type terminals, a modular cable of 4 conductors with a strong connector.
SPECIFICATIONS
Amplifier Probe
| Frequency | 1Hz~12kHz |
|---|---|
| Receiver distance | < 50cm |
| Sensitivity control | |
| Probe tip | Fixed |
| Power source | 9V(6F22) × 1 |
| Dimensions | 230(L) × 56(W) × 27(D)mm |
| Weight | Approx. 125g (battery included) |
Tone Generator
| Wave form | Square Wave |
|---|---|
| Frequency | 1kHz±15% |
| Over voltage protection | 80V DC |
| Single tone | ─ |
| Alternating tone | Fast and Slow |
| Connection | RJ11 connector, alligator clip x 2 RJ45 connector (optional) |
| Power source | 9V(6F22) × 1 |
| Dimensions | 86(L)×63(W)×26(D)mm |
| Weight (battery included) |
Approx. 130g |
General
| Operating temp & humidity | 0˚~40˚C, 80% Max. |
|---|---|
| Storage temp & humidity | -10˚~50˚C, 80% Max. |
| Safety standard | EN 61326-1 EN 55011 EN 6100-4-2 EN 6100-4-3 |
Feedback list